If you own an Epson L3210 printer, you probably love its efficiency and reliability. However, after prolonged use, you might encounter an issue where the printer suddenly stops working and displays a “Service Required” message. This happens because Epson printers have a built-in waste ink pad counter that tracks how much ink is used over time. When the limit is reached, the printer locks itself to prevent ink overflow.
The good news? You don’t need to rush to a service center or buy a new printer. The Epson L3210 Resetter Tool, also known as the Adjustment Program, can fix this issue in just a few minutes. In this guide, I’ll walk you through everything you need to know about downloading and using the resetter tool to bring your printer back to life.
Why Does Your Epson L3210 Need a Resetter?
Epson printers use waste ink pads to absorb excess ink during printing and cleaning cycles. Over time, these pads fill up, and the printer registers them as full, even if they’re not actually overflowing. When this happens, the printer stops working, and you’ll see error messages like:
- “Service Required”
- “Ink Pad is at the End of Its Service Life”
At this point, you won’t be able to print anything until the counter is reset. Instead of replacing the waste ink pads or taking your printer to a technician, you can use the Epson L3210 Resetter Tool to quickly reset the waste ink counter and get back to printing.
How to Download the Epson L3210 Resetter Tool
To fix this issue, you need to download the Epson L3210 Resetter Zip File. The download link is available below in this article.
Before downloading, keep in mind:
- The resetter tool is a small software program designed specifically for Epson printers.
- It works on Windows 7, 8, 10, and 11 (both 32-bit & 64-bit).
- You may need to disable your antivirus temporarily because some security programs flag it as a threat (which is a false positive).
Once you’ve downloaded the ZIP file, follow the instructions below to reset your printer.
How to Use the Epson L3210 Resetter Tool
Step 1: Extract the ZIP File
After downloading, locate the Epson L3210 Resetter ZIP file in your computer’s Downloads folder. Right-click on it and select “Extract Here” using WinRAR or 7-Zip.
Inside the extracted folder, you’ll find a file named Adjprog.exe—this is the resetter tool you need to run.
Step 2: Open the Resetter Program
- Double-click Adjprog.exe to launch the program.
- If a security warning appears, click Run Anyway.
- If the tool doesn’t open, try running it as an administrator (right-click → “Run as Administrator”).
Step 3: Select Your Printer Model
- Inside the resetter program, click on Select.
- Choose Epson L3210 from the list of printers.
- Click OK to confirm.
Step 4: Reset the Waste Ink Pad Counter
- Click on Particular Adjustment Mode.
- Find and select Waste Ink Pad Counter.
- Click Check to see your printer’s current waste ink counter level.
- Check the box that says Main Pad Counter and click Initialize.
Step 5: Restart Your Printer
Once the reset process is complete, turn off your printer for about 10 seconds. Then, turn it back on. Your printer should now be working normally, without any error messages!
Troubleshooting Common Issues
If you run into any problems while using the resetter tool, here are some quick fixes:
The Resetter Tool Won’t Open
- Make sure you’ve extracted the ZIP file before running Adjprog.exe.
- Try disabling your antivirus temporarily, as it might be blocking the program.
- Run the program as an Administrator (right-click → “Run as Administrator”).
The Printer Still Shows “Service Required” After Reset
- Ensure you followed all steps correctly, especially checking and initializing the waste ink counter.
- Try restarting both your printer and computer, then run the reset process again.
Windows Defender or Antivirus Blocks the File
- Since the resetter is a third-party tool, some security software may flag it as suspicious.
- You can temporarily disable Windows Defender or your antivirus before extracting and running the file.
Final Thoughts
The Epson L3210 Resetter Tool is an easy and effective way to fix waste ink pad errors and extend the life of your printer. Instead of spending money on repairs or a new printer, this simple tool allows you to reset your printer in just a few minutes.
